Oppo A15/A16/A5s Dead Boot Repair: Flash Factory Firmware using MTK Auth Skip
Download Oppo A15/A16/A5s Dead Boot Repair: Flash Factory Firmware using MTK Auth Skip
Fixing a bricked device doesn’t have to be a headache if you have the right files. This guide for Oppo A15/A16/A5s Dead Boot Repair: Flash Factory Firmware using MTK Auth Skip helps you revive phones that won’t power on or are stuck in preloader mode.
Using the official scatter-based firmware is the only way to correctly repartition a device after a failed update. This method allows you to bypass the secure boot protection without needing an authorized service center account.
The files provided here are tested on real hardware by mobile technicians. You can safely use them to fix software-related hardware hangs and MediaTek USB Port detection issues.
Top Reasons to Use This Factory Repair Firmware
- Fix Bootloops: Stops the device from constantly restarting at the Oppo logo.
- Remove Screen Locks: Clears pattern, pin, or fingerprint locks during the flashing process.
- Bypass MTK Auth: Skip the DA/Auth requirements using free bypass tools.
- Repair System Errors: Fixes “System UI has stopped” or other firmware corruption messages.
⚠️ DISCLAIMER
Flashing firmware on MediaTek devices carries risks. Only proceed if you understand how to use scatter files and LibUSB filters. We are not responsible for any permanent hardware damage or data loss resulting from incorrect flashing procedures.
📊 File Information
| File Name | Oppo_MTK_Repair_Firmware_Package.zip |
| Device Name | Oppo A15 (CPH2185), A16 (CPH2269), A5s (CPH1909) |
| Chipset | MediaTek MT6765 / MT6761 |
| Android Ver | Android 9.0 / 10.0 / 11.0 |
Minimum Requirements
✅ Supported Tools & Requirements
| Host PC: | Windows 7 / 8 / 10 / 11 (32-bit & 64-bit) |
| USB Cable: | Original or High-Quality Data Cable |
| USB Driver: | Oppo MTK USB VCOM Drivers |
| Battery Level: | At least 50% charge recommended |
🛠️ Best Flashing Tools for this Device
Based on the CPU and brand of this device, here are the highly recommended tools for flashing or unlocking:
- SP Flash Tool: The standard free utility for flashing MediaTek scatter files.
- UnlockTool: A premium choice for one-click dead boot repair and FRP removal.
- MCT Bypass Tool: Essential for disabling the security on CPH2185 and CPH2269 models.
⚡ How to Flash
- Download and extract the Oppo Factory Firmware and the MTK Auth Bypass tool.
- Install the MediaTek USB VCOM Drivers and the LibUSB filter on your computer.
- Launch the MTK Auth Bypass tool and click the “Bypass” or “Disable Auth” button.
- Power off your Oppo phone, hold both Volume buttons, and connect it to the PC via USB.
- Once the tool shows the “Auth Bypass Success” message, open SP Flash Tool.
- Load the Scatter File from the firmware folder and select “Download Only” or “Firmware Upgrade.”
- Click “Download” and wait for the green tick icon to signal the process is complete.
Rate & Review This Firmware
User Reviews
No reviews yet. Be the first to review!
About the Author / Developer
